|
United States

Minwax®
Professional Formula Sanding Sealer

在哪里买
Minwax®Professional Formula Sanding Sealer
概观

概观

Minwax®专业方程式打磨填孔剂是制定施工在裸露的木材明确的密封。其快干特性允许用于密封并在短短一天面漆项目。

  • Seals wood grain.
  • 易沙。
  • 烘一小时。
  • 对未染色的,裸露的木地板,家具,木门和橱柜使用。
  • 可与任何Minwax®油或水基聚氨酯面漆作为面漆。

产品详情

产品详情

应用工具: 合成的硬毛刷,泡沫涂敷器,或合成的垫施加器
Location: 内部木材表面
干燥时间: 1小时
清理: soap and water
覆盖范围: 125平方英尺。每夸脱
Recommended Uses: Use over bare wood floors, furniture, doors and cabinets before topcoating with any Minwax® oil or water-based polyurethane
路线

路线

Instrucciones西班牙文

注意:If wood is stained, it is not necessary to apply Minwax® Sanding Sealer prior to topcoating.

路线for Use:

For Interior Use Only

Warning!的旧油漆通过砂磨,刮擦或其它手段去除可以产生粉尘或含铅烟雾。接触铅粉尘或烟雾可能会造成脑损伤或其他不利健康的影响,特别是在儿童和孕妇。控制暴露于铅或其它有害物质需要使用的适当的保护设备,例如一个合适的带有呼吸器(NIOSH批准)和适当的遏制和清理。欲了解更多信息,请拨打全国铅信息中心1-800-424-LEAD(in US) or contact your local health authority.

  1. 沙项目分解到裸露的木材。
  2. Remove all dust, then thoroughly wipe with a damp cloth.
  3. 在使用过程中以及之前偶尔搅拌Minwax®打磨填孔剂。
  4. Apply a thin coat of Minwax® Sanding Sealer with a high quality synthetic bristle brush, foam applicator, or synthetic pad applicator.
  5. 允许表面干燥至少一小时。
  6. 打磨表面用新的320粒度的砂纸或屏幕或栗色地板垫。清除所有灰尘。
  7. 套用任何Minwax®油或水性聚氨酯的两个或三个大衣,标签上的说明如下。下漆,请勿使用。

注意:Drying time will be increased by high humidity, low temperature, lack of air movement or heavier application.

CLEANUP:Clean application tools with warm water immediately after use.

COVERAGE:Approximately 500 square feet per gallon.

注意事项:仅在充足的通风换气。为了避免过度曝光,打开门窗或使用其他手段来确保应用和干燥过程中的新鲜空气进入。如果遇到眼睛流泪,头痛和晕眩,增加新鲜空气,或戴呼吸防护(NIOSH批准),或离开该区域。

避免接触眼睛和皮肤。使用后洗手。不用时请关闭容器。不要内容转移到其他容器储存。

FIRST AID:In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

警告:本产品含有加州已知的会导致癌症的化学物质状态。

DO NOT TAKE INTERNALLY.

放在儿童接触不到的地方。

经常问的问题

经常问的问题

What is Minwax® Sanding Sealer?

Minwax®二度底漆制定工作base coat under any Minwax® oil or water-based polyurethane finish. It seals the wood grain, and is designed to be easy to sand, providing an ultra-smooth finish. It is formulated for use on unstained, interior, bare wood surfaces including floors, furniture, doors and cabinets.

How long does it take for Minwax® Sanding Sealer to dry?

这需要Minwax®砂光封口机只有一个小时干的!Minwax®打磨填孔剂的快干功能,您可以密封和在一天面漆项目。

Which Minwax® products can be used with Minwax® Sanding Sealer?

Minwax®打磨填孔剂可与任何Minwax®油或水基的聚氨酯面漆,如使用Minwax®快干聚氨酯Minwax®超级快干聚氨酯的地板, 要么Minwax®水基油改性聚氨酯

Can Minwax® Sanding Sealer be used over stained wood?

This is not recommended. The purpose of Sanding Sealer is to seal the wood and form a base coat for a protective clear finish. If the wood has been stained, Sanding Sealer is not necessary. In addition, it's possible to scuff the stain while sanding the sealer. Sanding Sealer is best used on bare wood.

可以染色过Minwax®打磨封口机适用?

号打磨填孔剂完全密封的木材。这将防止木材不吸收污渍。

Safety Sheets

Safety Sheets

Reviews

Reviews

概观

Minwax®专业方程式打磨填孔剂是制定施工在裸露的木材明确的密封。其快干特性允许用于密封并在短短一天面漆项目。

  • Seals wood grain.
  • 易沙。
  • 烘一小时。
  • 对未染色的,裸露的木地板,家具,木门和橱柜使用。
  • 可与任何Minwax®油或水基聚氨酯面漆作为面漆。

产品详情

应用工具: 合成的硬毛刷,泡沫涂敷器,或合成的垫施加器
Location: 内部木材表面
干燥时间: 1小时
清理: soap and water
覆盖范围: 125平方英尺。每夸脱
Recommended Uses: Use over bare wood floors, furniture, doors and cabinets before topcoating with any Minwax® oil or water-based polyurethane

路线Instrucciones西班牙文

注意:If wood is stained, it is not necessary to apply Minwax® Sanding Sealer prior to topcoating.

路线for Use:

For Interior Use Only

Warning!的旧油漆通过砂磨,刮擦或其它手段去除可以产生粉尘或含铅烟雾。接触铅粉尘或烟雾可能会造成脑损伤或其他不利健康的影响,特别是在儿童和孕妇。控制暴露于铅或其它有害物质需要使用的适当的保护设备,例如一个合适的带有呼吸器(NIOSH批准)和适当的遏制和清理。欲了解更多信息,请拨打全国铅信息中心1-800-424-LEAD(in US) or contact your local health authority.

  1. 沙项目分解到裸露的木材。
  2. Remove all dust, then thoroughly wipe with a damp cloth.
  3. 在使用过程中以及之前偶尔搅拌Minwax®打磨填孔剂。
  4. Apply a thin coat of Minwax® Sanding Sealer with a high quality synthetic bristle brush, foam applicator, or synthetic pad applicator.
  5. 允许表面干燥至少一小时。
  6. 打磨表面用新的320粒度的砂纸或屏幕或栗色地板垫。清除所有灰尘。
  7. 套用任何Minwax®油或水性聚氨酯的两个或三个大衣,标签上的说明如下。下漆,请勿使用。

注意:Drying time will be increased by high humidity, low temperature, lack of air movement or heavier application.

CLEANUP:Clean application tools with warm water immediately after use.

COVERAGE:Approximately 500 square feet per gallon.

注意事项:仅在充足的通风换气。为了避免过度曝光,打开门窗或使用其他手段来确保应用和干燥过程中的新鲜空气进入。如果遇到眼睛流泪,头痛和晕眩,增加新鲜空气,或戴呼吸防护(NIOSH批准),或离开该区域。

避免接触眼睛和皮肤。使用后洗手。不用时请关闭容器。不要内容转移到其他容器储存。

FIRST AID:In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately.

警告:本产品含有加州已知的会导致癌症的化学物质状态。

DO NOT TAKE INTERNALLY.

放在儿童接触不到的地方。

经常问的问题

What is Minwax® Sanding Sealer?

Minwax®二度底漆制定工作base coat under any Minwax® oil or water-based polyurethane finish. It seals the wood grain, and is designed to be easy to sand, providing an ultra-smooth finish. It is formulated for use on unstained, interior, bare wood surfaces including floors, furniture, doors and cabinets.

How long does it take for Minwax® Sanding Sealer to dry?

这需要Minwax®砂光封口机只有一个小时干的!Minwax®打磨填孔剂的快干功能,您可以密封和在一天面漆项目。

Which Minwax® products can be used with Minwax® Sanding Sealer?

Minwax®打磨填孔剂可与任何Minwax®油或水基的聚氨酯面漆,如使用Minwax®快干聚氨酯Minwax®超级快干聚氨酯的地板, 要么Minwax®水基油改性聚氨酯

Can Minwax® Sanding Sealer be used over stained wood?

This is not recommended. The purpose of Sanding Sealer is to seal the wood and form a base coat for a protective clear finish. If the wood has been stained, Sanding Sealer is not necessary. In addition, it's possible to scuff the stain while sanding the sealer. Sanding Sealer is best used on bare wood.

可以染色过Minwax®打磨封口机适用?

号打磨填孔剂完全密封的木材。这将防止木材不吸收污渍。

Safety Sheets

我们还建议

下面是一些附加的产品和技巧的探索。